Starting with the numeric button [0], press all number buttons in order until the LED lights. When it does, that's the first number of the three digit code. Repeat this process for digits three and four. Press and release the [AUX] button. The LED will remain lit. Select the type of device you would like to program by pressing the matching device button. Sleep Timer: The Sleep Function will turn off a device after a designated amount of time, from 1 to 99 minutes.
Press the button for the device you want to enable this on. Each time you press the [SLEEP] key the time will increment 15 minutes, up to a maximum of 60 minutes. Keep your remote pointed at the device. After the configured time expires, the device will be shut off. Codes for the RCU Remote:. Return to Programming Your Remote All rights reserved. The indicator light blinks and then remains lit. Step 3: Enter the 3-digit code number. After you enter a valid three-digit code, the indicator light turns off.
The indicator light blinks once and then remains lit. The remote automatically sends every code for the specified component one at a time, with a a few seconds delay between each code. Keep the remote aimed at the component throughout the process. Step 5: As soon as the component turns off, you must press the "ENTER" button immediately for the remote to store the correct code.
If you don't press "ENTER" within a few seconds, the remote will send the next code in the list and you will have to start over from Step 2. Step 6: Use Code Retrieval described below to identify the code for your device for future reference.
If you used one of the "Code Search" methods to program your universal remote control, follow the steps below to find out which code is compatible with your device. Finding the actual code and writing it down will save you a lot of time if you ever need to program the remote again.
The indicator light will blink once then remains lit. The indicator light will turn off. Step 4: Starting with 0, press the number keys in order until the indicator light blinks. Step 5: The number that causes the indicator light to blink is the first digit of your code.
Step 6: Repeat Step 4 until you have retrieved all 3 numbers of your code. The Sleep Function is implemented only in a few models. It will turn off the TV automatically after the user programs the time interval from 1 to 99 minutes. The indicator light will stay lit. Step 2: Enter time in minutes using the numerical keypad from 1 minute to 99 minutes. For 1 to 9 minutes press 0 before the actual number. The indicator light will go off. Leave the remote aimed at the TV set.
Find the 3 digit code for your device first in the code lists on this page.
0コメント